If you ever heard Tommy play, you will recognize that his sound is much more than loud and dynamic. He does not use effect pedals - his sound is a marriage between his fingers, his guitars and his amplifier. AER has made a wonderful amplifier to fit Tommy's needs. To reproduce the typical‚ initiation tone, the on-board delay had to be slightly changed. The sound Tommy produces on-stage has to be sent exactly to the front-of-house PA system. A switchable pre/post efx DI provides the tone on and off the stage.
This is a USED amplifier in EXCELLENT condition. If you have any questions please give us a call at (217) 607-8132.
SPECS:
- Channel 1
- 6.3 mm (1/4”) input jack as high
impedance line input with pad (high/low attenuation),
9 V phantom power (switchable), and gain control
- Channel 2 combined XLR/6.3 mm (1/4”)
- jack socket as high-impedance line or balanced microphone
input, 48 V, gain control
- Equalizer
- three band tone controls for channel 1
and
two band tone controls for channel 2
- Colour
- mid-cut treble boost filter
- Digital effect processor with 4 presets:
- 2 x reverb, delay, chorus
(Effect #3 is a delay with 213.5 beats-per-minute).
- Power amp 60 W / 4 ohms
- Analog signal processing
- subsonic filter, adaptive peak limiter
- Speaker system
- 8” (200 mm) twin-cone speaker
- Features
- headphones, line out, pre/post effect
switchable DI-out,
external parallel effect loop,
footswitch (internal/external effect on/off),
3.5 mm aux in jack socket, tuner out
- Dimensions
- 260 mm x 325 mm x 240 mm
(10.20“ x 12.80“ x 9.45“), HxWxD
- Weight
